Back to Watches

1120-05

1100-05

Case in stainless steel 316L, Ø40mm with basin-shaped profile. Water-resistant to 3 bar. Total thickness of 11mm, crystal included. Box type sapphire crystal with double sided anti-reflective coating. Case back in stainless steel 316L with lugs, stamped logo and blue mineral crystal. Dial in dark nickel galvanic color with 15 applied indices and parts in galvanic rose gold 4N color. Medium olive green suede calf leather strap and electric blue lining (suede leather). Tongue buckle in stainless steel 316L. Swiss mechanical movement (Sellita SW300-1 Premium) with automatic winding, 42 hours of power reserve, 25 jewels, 28’800 vibrations/hour (4Hz), displaying hours, minutes and seconds with hands and date of the month by disc.

More details under the tab « Specifications ».

 

CHF 3'069.45

_

_

Design specifications

The basin-shaped case band design is extended by the radius of the box type crystal on the top and the radius of the case back at the bottom. The lugs, which are a part of the case back and therefore visibly separated from the case band, enhance the basin-shape design by giving it a subtle visual effect made of curves.The logo on the case back is emphasized by the inner colored crystal, giving a stained glass feeling to it.

Case band

Round shape. Ø40mm. Stainless steel EN1.4404 (316L). Water-resistant to 3 bar. Material indication «316L» and individual number are made by deep acid etching between the lugs. Stainless steel casing ring. The assembled watch has a total thickness on 11mm.

Crown and tube

Crown in stainless steel EN 1.4435 (316L) with 7 notches, all polished (except the microblasted notches). Ergonomic shape that prevents the crown from scratching the wrist and is still very easy to use.

Case back

In stainless steel EN.1.4404. Top surfaces of the lugs have a satin finish and the area around the logo is microblasted, the rest is all polished. «Lundis Bleus» is done by stamping. The logo is made by cutting and then is soldered. The case back is assembled to the case band by 4 screws in stainless steel.

Top crystal

Domed box type shape in sapphire. Ø37.65mm for a total thickness of 4mm to the apex. Both sides are hard, colorless, and have multi-layered anti-reflective coating. Press-fitted on a non-visible I-ring.

Bottom crystal

Flat shape in hardened mineral glass. Colored in blue from the block. Press-fitted from the inside of the case back on a non-visible I-ring and held in place by a stainless steel ring.

Dial

Double plate design (in brass). Plates in galvanic dark nickel plating. All applied parts have a galvanic rose gold 4N plating. Bottom plate with grained pattern made by stamping. Upper plate cut and decorated with a circular satin finish. Domed circular applied logo, Ø4.00mm. 12 stick-shaped applied indices. Polished applied date window at 6 o’clock. Polished applied central chimney used to enhance the lateral view on hand-fitting. Date disc with specific Lundis Bleus font and backgroud color matching dial main color. Minute track is pad printed in a light matt grey varnish. Opening of Ø33.00mm.

Hands

Flat cut hour and minute hands, in brass, with galvanic rose gold 4N plating. Skeleton type with specific Lundis Bleus shape. Flat cut central second hand with long couterweight, in brass, with galvanic rose gold 4N plating.

Leather strap

Width 19mm, straight. Long part 115mm, short part 77mm. Rembordé construction (turned-in) without stitching. Large fixed loop and narrow removable loop. Medium olive green suede calf leather strap and electric blue lining (suede leather). 8 holes.

Tongue buckle

Stainless steel EN1.4404 (316L). Top surface with satin finish, sides polished and back microblasted. The sides are slightly sloped echoing the lugs.

Movement

Swiss mechanical movement (Sellita SW300-1 Premium) with automatic winding, 42 hours of power reserve, 25 jewels, 28’800 vibrations/hour (4Hz), displaying hours, minutes and seconds with hands and date of the month by disc.

Box

160x160x90mm. In MDF with matt grey varnish finish. Lining in grey fabric. Hinges in steel. Push button and double bevel to facilitate the opening. The watch is presented on a grey fabric cushion within the removable tray. Delivered in a black cardboard protection box. The warranty card is laying under the removable tray.

Warranty

Your Lundis Bleus watch is covered for 5 years again manufacturing defects. Your watch is delivered along with its engraved stainless steel warranty card.

Reviews

There are no reviews yet.

Show reviews in all languages (1)

Be the first to review “1120-05”

Your email address will not be published. Required fields are marked *