1120-EM “Lundis Bleus Abstract”
1120-EM “Lundis Bleus Abstract” (1120.EM.LB.DDR.ADR)
Note: The creation of kiln-fired enamel dials being artisanal and limited to only a few pieces per month, a manufacturing period of about 6 weeks is to be expected before shipping. If a specific date of delivery is to be respected, please contact us before ordering to discuss it.
Case in stainless steel 316L, Ø40mm with basin-shape profile. Water-resistant to 3 bar. Total thickness of 11mm, crystal included. Box type sapphire crystal with double sided anti-reflective coating. Case back in stainless steel 316L with lugs, stamped logo and transparent sapphire crystal. Dial in sterling sliver 925/1000 covered in a special mix of 11 shades of blue enamel, according to the traditional «grand feu» process of enamelling (several firing at around 830°C). Index and logo by pad printing in rose gold color varnish. Resembling a contemporary painting, this one-of-a-kind dial will catch your sight. Smooth dark brown French calf leather strap, brown lining, hand stitching. Tongue buckle in stainless steel 316L. Swiss mechanical movement (Sellita SW300-1 Premium) with automatic winding, 42 hours of power reserve, 25 jewels, 28’800 vibrations/hour (4Hz), displaying hours, minutes and seconds with hands.
More details under the tab « Specifications ».
Available on backorder
The basin-shaped case band design is extended by the radius of the box type crystal on the top and the radius of the case back at the bottom. The lugs, which are a part of the case back and therefore visibly separated from the case band, enhance the basin-shaped design by giving a subtle visual effect made of curves.The logo on the case back is emphasized by the inner crystal, giving a stained glass feel to it.
Round shape. Ø40mm. Stainless steel EN1.4404 (316L). Water-resistant to 3 bar. Material indication «316L» and individual number are made by deep acid etching between the lugs. Stainless steel casing ring. The assembled watch has a total thickness on 11mm.
|Crown and tube||
Crown in stainless steel EN 1.4435 (316L) with 7 notches, all polished (except the microblasted notches). Ergonomic shape that prevents the crown of scratching the wrist and is still very easy to use.
In stainless steel EN.1.4404. Top surfaces of the lugs have a satin finish and the area around the logo is microblasted, the rest is all polished. «Lundis Bleus» is done by stamping. The logo is made by cutting and then is soldered. The case back is assembled to the case band by 4 screws in stainless steel.
Domed box type shape in sapphire. Ø37.65mm for a total thickness of 4mm to the apex. Both sides are hard, colorless, and have multi-layered anti-reflective coating. Press-fitted on a non-visible I-ring.
Flat shape in transparent sapphire. Press-fitted from the inside of the case back on a non-visible I-ring and held in place by a stainless steel ring.
Dial in sterling sliver 925/1000 covered in a special mix of 11 shades of blue enamel, according to the traditional «grand feu» process of enamelling (several firing at around 830°C). Index and logo by pad printing in rose gold color varnish. Resembling a contemporary painting, this one-of-a-kind dial will catch your sight. The dial is entirely manufactured in-house at Lundis Bleus.
Flat cut hour and minute hands, in brass, with galvanic rhodium plating. Skeleton type with specific Lundis Bleus shape. Flat cut central second hand with long couterweight, in brass, with galvanic rhodium plating.
Width 19mm, straight. Long part 120mm, short part 80mm. Rembordé construction (turned-in). Large fixed loop and narrow removable loop. Smooth dark brown French calf leather, brown lining, hand stitching.
Stainless steel EN1.4404 (316L). Top surface with satin finish, sides polished and back microblasted. The sides are slightly sloped echoing the lugs.
Swiss, Sellita SW300-1 Premium, with automatic winding. Ø25.60mm, thickness 3,75mm (hand-fitting height excluded). 42 hours of power reserve. 25 jewels. 28’800 vibrations/hour (4Hz).
160x160x90mm. In MDF with matt grey varnish finish. Lining in grey fabric. Hinges in steel. Push button and double bevel to facilitate the opening. The watch is presented on a grey fabric cushion within the removable tray. Delivered in a black cardboard protection box. The warranty card is laying under the removable tray.
Your Lundis Bleus watch is covered for 5 years against manufacturing defects. Your watch is delivered along with its engraved stainless steel warranty card.