Back to Watches

1120-GM “Fujisan”

1120-GM “Fujisan”(1120.GM.FS)

Note: This model is made on request only. The production lead time is about 10-12 weeks. Please contact us to discuss the details of your watch.


Case in stainless steel 316L, Ø40mm with basin-shape profile. Water-resistant to 3 bar. Total thickness of 11mm, crystal included. Box type sapphire crystal with double sided anti-reflective coating. Case back in stainless steel 316L with lugs, stamped logo and transparent sapphire crystal. Dial in white gold with hand-engraved Japanese landscape. The engraving is done by Jean-Bernard Michel. Tongue buckle in stainless steel 316L. Swiss mechanical movement (Sellita SW300-1 Premium) with automatic winding, 42 hours of power reserve, 25 jewels, 28’800 vibrations/hour (4Hz), displaying hours, minutes and seconds with hands.

More details under the tab « Specifications ». | Discover de story behind the model 


CHF 12'924.00

Out of stock



Design specifications

The basin-shaped case band design is extended by the radius of the box type crystal on the top and the radius of the case back at the bottom. The lugs, which are a part of the case back and therefore visibly separated from the case band, enhance the basin-shaped design by giving a subtle visual effect made of curves.The logo on the case back is emphasized by the inner crystal, giving a stained glass feel to it.

Case band

Round shape. Ø40mm. Stainless steel EN1.4404 (316L). Water-resistant to 3 bar. Material indication «316L» and individual number are made by deep acid etching between the lugs. Stainless steel casing ring. The assembled watch has a total thickness on 11mm.

Crown and tube

Crown in stainless steel EN 1.4435 (316L) with 7 notches, all polished (except the microblasted notches). Ergonomic shape that prevents the crown of scratching the wrist and is still very easy to use.

Case back

In stainless steel EN.1.4404. Top surfaces of the lugs have a satin finish and the area around the logo is microblasted, the rest is all polished. «Lundis Bleus» is done by stamping. The logo is made by cutting and then is soldered. The case back is assembled to the case band by 4 screws in stainless steel.

Top crystal

Domed box type shape in sapphire. Ø37.65mm for a total thickness of 4mm to the apex. Both sides are hard, colorless, and have multi-layered anti-reflective coating. Press-fitted on a non-visible I-ring.

Bottom crystal

Flat shape in transparent sapphire. Press-fitted from the inside of the case back on a non-visible I-ring and held in place by a stainless steel ring.


Japanese landscape entirely hand-engraved in La Chaux-de-Fonds by Jean-Bernard Michel (www.jeanbernardmichel). The dial is made of white gold (Au750, Pd125) and weighs about 13 grams.


Flat cut hour and minute hands, in brass, with galvanic rhodium plating. Skeleton type with specific Lundis Bleus shape. Flat cut central second hand with long couterweight, in brass, with galvanic rhodium plating.

Leather strap

High end alligator leather strap made-to-measure, handcrafted in Switzerland after order. Many features of this strap can be chose by the customer (to some extent): length, color and material of the leather and lining, handmade stitching and color of the thread (or no stitching). This can be discussed before the order is placed or after. The version depicted on the main picture is a light brown alligator strap with large scales, no stitching. On this one, the lining is also a light brown alligator leather, but with small round scales.

Tongue buckle

Stainless steel EN1.4404 (316L). Top surface with satin finish, sides polished and back microblasted. The sides are slightly sloped echoing the lugs.


Swiss, Sellita SW300-1 Premium, with automatic winding. Ø25.60mm, thickness 3,75mm (hand-fitting height excluded). 42 hours of power reserve. 25 jewels. 28’800 vibrations/hour (4Hz). Oscillating weight hand-engraved by Jean-Bernard Michel (www.jeanbernardmichel).


This model is delivered in a high end calf leather travelling pouch. The original color of the pouch is light brown, but it can also be done in black, dark brown or dark blue on request. For other colours or material, please contact us before ordering.


Your Lundis Bleus watch is covered for 5 years against manufacturing defects. Your watch is delivered along with its engraved stainless steel warranty card.


There are no reviews yet.

Be the first to review “1120-GM “Fujisan””

Your email address will not be published. Required fields are marked *