1120-MA “Sea of Japan – Black”
1120-MA “Sea of Japan- Black” (1120.MA.CL.MJ.NR)
Note 1: The creation of kiln-fired cloisonné enamel dials being artisanal and limited to only 1-2 pieces per month, a manufacturing period of about 8 weeks is to be expected before shipping. If a specific date of delivery is to be respected, please contact us before ordering to discuss it.
Note 2: Other maps or patterns are possible on request. Please contact us and we will discuss about your idea.
Case in stainless steel 316L, Ø40mm with basin-shape profile. Water-resistant to 3 bar. Total thickness of 11mm, crystal included. Box type sapphire crystal with double sided anti-reflective coating. Case back in stainless steel 316L with lugs, stamped logo and transparent sapphire crystal. Central dial in sterling sliver 925/1000 with hand engraved «Ocean» texture, fine gold cloisonné enamel depicting the “Sea of Japan”, made according to the traditional art of «grand feu» enamelling (several firing at around 830°C). Black opalin exterior dial, diamond cut and rhodium-plated markers, light grey minute track. High end alligator leather strap made-to-measure, handcrafted in Switzerland. Tongue buckle in stainless steel 316L. Swiss mechanical movement (Sellita SW300-1 Premium) with automatic winding, 42 hours of power reserve, 25 jewels, 28’800 vibrations/hour (4Hz), displaying hours, minutes and seconds with hands.
More details under the tab « Specifications ».
Available on backorder
The basin-shaped case band design is extended by the radius of the box type crystal on the top and the radius of the case back at the bottom. The lugs, which are a part of the case back and therefore visibly separated from the case band, enhance the basin-shaped design by giving a subtle visual effect made of curves.The logo on the case back is emphasized by the inner crystal, giving a stained glass feel to it.
Round shape. Ø40mm. Stainless steel EN1.4404 (316L). Water-resistant to 3 bar. Material indication «316L» and individual number are made by deep acid etching between the lugs. Stainless steel casing ring. The assembled watch has a total thickness on 11mm.
|Crown and tube||
Crown in stainless steel EN 1.4435 (316L) with 7 notches, all polished (except the microblasted notches). Ergonomic shape that prevents the crown of scratching the wrist and is still very easy to use.
In stainless steel EN.1.4404. Top surfaces of the lugs have a satin finish and the area around the logo is microblasted, the rest is all polished. «Lundis Bleus» is done by stamping. The logo is made by cutting and then is soldered. The case back is assembled to the case band by 4 screws in stainless steel.
Domed box type shape in sapphire. Ø37.65mm for a total thickness of 4mm to the apex. Both sides are hard, colorless, and have multi-layered anti-reflective coating. Press-fitted on a non-visible I-ring.
Flat. In transparent sapphire. Press-fitted from the inside of the case back on a non-visible I-ring and held in place by a stainless steel ring.
Brass with black galvanic plating, opalin finish. 12 applied markers in brass, diamond cut and rhodium plating. Light grey pad printing.
Central dial in sterling sliver 925/1000 with hand engraved «Ocean» texture, depicting the map of the "Sea of Japan". The cloisons are made by hand, using a thin and flat thread of fine gold (0.05×0.40mm = 0.002×0.015in). When they are fired on a first layer of transparent flux, the cloisons are then filled with different enamels, layer by layer, and fired in the kiln at about 830°C/1530°F according to the art of "grand feu enamel". In all, 8 different enamels and 10+ firings are necessary before starting the final operation of lapping polishing. The enamel dials are entirely manufactured at the Lundis Bleus workshop.
Flat cut hour and minute hands, in brass, with galvanic rhodium plating. Skeleton type with specific Lundis Bleus shape. Flat cut central second hand with long couterweight, in brass, with galvanic rhodium plating.
High end alligator leather strap made-to-measure, handcrafted in Switzerland after order. Many features of this strap can be chose by the customer (to some extent): length, color and material of the leather and lining, handmade stitching and color of the thread (or no stitching). This can be discussed before the order is placed or after. The version depicted on the main picture is a black alligator strap with large scales, no stitching. On this one, the lining is also a black alligator leather, but with small round scales.
Stainless steel EN1.4404 (316L). Top surface with satin finish, sides polished and back microblasted. The sides are slightly sloped echoing the lugs.
Swiss, Sellita SW300-1 Premium, with automatic winding. Ø25.60mm, thickness 3,75mm (hand-fitting height excluded). 42 hours of power reserve. 25 jewels. 28’800 vibrations/hour (4Hz).
This model is delivered in a high end calf leather travelling pouch. The original color of the pouch is light brown, but it can also be done in black, dark brown or dark blue on request. For other colours or material, please contact us before ordering.
Your Lundis Bleus watch is covered for 5 years against manufacturing defects. Your watch is delivered along with its engraved stainless steel warranty card.